How To Create A New Alarm Job

Alarm jobs in TM Master help automate alerts based on specific conditions, ensuring timely issue resolution. This guide will show you how to easily set up and configure an alarm job in TM Master, step by step.

1. First head to inventory -> alarms to see a full overview of all alarms you can create jobs for.
   
   
   
   
2. Open the alarm you wish to create a job for and head to the "jobs" tab. (if any jobs are already assigned to the alarm these will already be visible in the jobs list)
   
   
   
   
3. Select the create new alarm job option which will open up a list of all standard alarm job templates to chose from.
   
   
   
   
4. Select the alarm standard job template you wish to use and select "ok".
   
   
   
   
5. The job creation window will now appear and will be pre input with information that has been pulled directly from the alarm standard job template. (information of alarm standard jobs can be found in the following article https://oceantechnologiesgroupsupport.zendesk.com/hc/en-gb/articles/18919117855388-Alarm-Standard-Jobs)
   
   
6. The fields highlighted below cannot be edited and are hardcoded based on the alarm itself and the alarm standard job template used.
   
   
   
   
7. Input all relevant information in the remaining fields such as the category, due date, interval etc and then select of of the save options.
   
   
   
   
8. The alarm job will then be visible on both the jobs tab on the alarm itself and within the alarms due list.